Neo Geometric designs of wild animals - set of bookmarks
Week 63 4th design -
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Basic Bright Green (10503) Transmission Distance: 4 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #12 (1.04mm) swap to Bright Green (10503) At layer #17 (1.44mm) swap to Ivory White (11100) for the rest.
























