Week 63 - yes, this one isn't "cutesy", but I went down and interesting rabbit hole.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments

Swap Instructions: Start with Maroon Red (10205) At layer #6 (0.56mm) swap to Black (10101) At layer #9 (0.8mm) swap to Blue Grey (10602) At layer #12 (1.04mm) swap to Maroon Red (10205) At layer #16 (1.36mm) swap to Blue Grey (10602) At layer #20 (1.68mm) swap to Ivory White (11100) for the rest.