COMMERCIAL LICENCE PERSONAL PLAN - UNLOCK ALL DESIGNS

Print Settings

Base:

Layer Height: 0.2mm Walls: 3 Infill: 5% Gyroid (You can use 15% Lightning for less filament use)

Shade: Layer Height: 0.2mm Walls: 2 Infill: 15% Lightning Seam Position: Back

Important Notes:

1. Make Sure To Push Light Socket Down Deep, as the photo shows (This allows to keep a smaller body with a full A19 (E27) Bulb in it.
2. The lamp uses a threaded screw on style, this is my first attempt with this feature and is working perfectly with my printer's tolerance, if you have any issues please let me know!!
3. The threaded screw stye will also allow you to adjust the height of the shade to base to achieve some of the looks from the images!

Materials Used: Electrical Parts: Cord: https://amzn.to/45nkedM Socket: https://amzn.to/3USVkhc Bulk Light Bulbs: https://amzn.to/4mvfM3t

PLA: White Matte PLA: https://amzn.to/4osonFS Navy Matte PLA: https://amzn.to/3UPuTZI Terracotta Matte PLA: https://amzn.to/4lmPDmp Dark Brown Matte PLA: https://ca.store.bambulab.com/products/pla-matte?id=45421259915504