Fantasy depiction of a Queen warrior at the end of the great battle - Hueforge art
Last piece of art:
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Maroon Red (10205) At layer #11 (0.96mm) swap to Beige (10201)
Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White (10100) for the rest.






















