3rd is a design showcasing what is made to look like the drawing of a woman who is a prototype warrior being built.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Bambu Labs Matte Dark Red (11202) tgransmission Distance: 0.2 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Red (11202) At layer #11 (0.96mm) swap to Beige (10201)

Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White (10100) for the rest.