Fantasy Art - Elven Musician Sharing her Gifts under the Moonlight - Hueforge Art
Art tonight - First is this elven musician
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.44x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 PLA Bambu Labs Matte Matte Caramel (11803) Transmission Distance: 2 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Dark Chocolate At layer #9 (0.8mm) swap to Matte Caramel (11803)
Border Only Colors from here until the end. At layer #12 (1.04mm) swap to Beige (10201) for the rest.






















