The dark beauty of the elven enchantress - Set of bookmarks
4th set for the week - some artistic designs of an elven character I have been developing.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #13 (1.12mm) swap to Dark Chocolate At layer #15 (1.28mm) swap to Beige (10201) At layer #24 (2mm) swap to Ivory White (11100) for the rest.
























