This week starting with something a little different in that it is only 2 parts, instead of the typical 3, and they go together.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #7 (0.64mm) swap to Blue Grey (10602) At layer #14 (1.2mm) swap to Jade White (10100) At layer #21 (1.76mm) swap to Red (10200) for the rest.