This is a sword that I remixed from the one @EastLee_1667826 made for Dummy 13's, https://www.printables.com/model/887095-buster-sword-for-dummy-13-final-fantasy. Mine is scaled up for around voyager to leader class Transformers, I guess a deluxe could use one too but it would be insanely massive. I kept the guard piece separate for ease of color changing/painting. I also allowed for the handle to be printed in a separate color, however the main reason for separating the handle was so that you could print 2 swords and connect them at the base of the handles. The included 5mm peg is to be pegged into either whole on the sword for storage, combining of 2 swords, or whatever you think of.

Most of the assembly is straight forward but there is a lot of tolerance issues that may come up so make sure before gluing anything carefully fix the tolerance. -Printing both sword halves separate then gluing them together leads to the best result -Also printing all the cylindrical parts horizontal makes them quite a bit stronger. -Then sliding on the guard and gluing that on -Then glue on the handle part -Then glue in the connector pin, only to one of the swords