🍀 Build-a-Gnome St. Patrick’s Day Add-On STL Bundle – Leprechaun Hat & Shamrock 🌈 Add a bit of Irish luck to your seasonal gnome with the St. Patrick’s Day Add-On Bundle – a festive set of accessories made to pair with your Build-a-Gnome base model (sold separately). Great for March displays, holiday shelves, or just spreading a little extra green! This St. Patrick’s Day bundle includes:

• A classic leprechaun-style hat – complete with festive flair!
• A bold shamrock to hold – a symbol of luck and tradition! Important: This listing includes STL files only for the hat and shamrock. You must own or purchase the Build-a-Gnome Base Model to use this bundle: https://than.gs/m/1384082

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use this base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. *Minimal glue needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the Top Hat and Decorative Shamrock (as shown in the photo)
• Clean, support-light design optimized for easy printing
• Commercial license included — no subscription or extra fees needed Whether you're decorating your home or selling seasonal items, this modular gnome is a must-have project for your 3D print lineup. Start your collection today and let your gnome evolve with every season!

🍀 Dress your gnome for the season of renewal – and don’t forget to check out the full growing collection of Build-a-Gnome accessories!

Assembly Note Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.
For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory in the gnome’s hands. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion of for certain small parts. Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate. Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos. Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – YES – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10 - 15%
• Wall Loops - 2