Birds sitting on the blossoming cherry Tree branches - set of bookmarks
2nd Bonus - something a little spirngish.
For these models:
Project: pinkbird1c.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue Grey (10602) Transmission Distance: 3 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 PLA Bambu Labs Basic Pink (10203) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Blue Grey (10602) At layer #12 (1.04mm) swap to Jade White (10100) At layer #21 (1.76mm) swap to Pink (10203) for the rest.
























