Check out how I made it in the video: https://www.youtube.com/watch?v=-BccljKX9dc

Most standard yarn thicknesses fit into the mesh holes. Most bag straps are compatible with the bag (search for "Crossbody bag strap" on Amazon to find a good one).

Printing Orientation:

• Print all parts laid down horizontally on the print bed if possible
• No supports
• Add a decently-sized brim (around 35 lines) if your printer has adhesion/warping problems

Parts Description: FrontBoard: needs to be printed out 6 times, with 3 panels in the front and 3 panels in the back. SideBoard: needs to be printed out 2 times. BackBoard: needs to be printed out 8 times to cover 6 FrontBoards and 2 SideBoards. BottomBoard_Mesh: needs to be printed out 1 time. BottomBoard_Cover: needs to be printed out 1 time. StitchBlocker: optional but highly recommended; blocks stitching yarn from getting into the groove where the BackBoard goes.

My printer setup: FLSun Super Racer (SR) Standard sized nozzle White PLA filament