Introducing my new pixel fidget that is hot out of the oven: the Pixel Pizza Fidget 🍕

I designed these Pixel Pizza Slices in two parts: the pizza slice and the pizza crust. And, if you’re up for printing 6 slices, I also designed a pan to hold them 🍕🍕🍕

Dimensions of Pizza Slice (assembled): 3 ¼ in x 3 ¼ in x 1 ⅓ in Dimensions of Pizza Pan: 6 ⅞ in x ⅞ in.

Basic PLA is the best for this print. I don’t recommend PLA Silk or PLA Matte filaments. It is very detailed (on the inside) and the tolerances are small. I printed several of these in these three types of filaments and Basic PLA always printed the best and had smoothest “movement” when done.

Layer Height 0.2mm Infill 10-15% Supports needed in the cavity at the end of the pizza slice and on the crust

I've included a 3mf file with the following print profile: Print Plate #1: Pizza Slice(3 colors) supports in cavity at the end of the slice Print Plate #2: Pizza Crust (1 color), supports added Print Plate #3: Pizza Pan (1 color)

To assemble, fit the pizza crust onto the end of the pizza slice. It should be a snug fit but feel free to add a little super glue if you would like:)

Enjoy!