Switch2 Docking Station Stand - Inspired by Donkey Kong - Fan Art
701 downloads · 11 months ago · Hi guys, here comes my brand new Switch Docking Station Stand for your SWITCH2 - Inspired by Donkey
Hi guys, here comes my brand new Switch Docking Station Stand for your SWITCH2 - Inspired by Donkey Kong from Nintendo! Allert! Retro vibes are coming if you download this awesome file! The Gorilla is holding your brand new Switch2 until you start to game! The Push Button Mechanism is next high level setup for your 3d printing model! Read description and check the model images to get that push button mechanism! Setup your Switch 2 to the next level! :)
SETTINGS:
- printer: BambuLab A1
- NO supports!
- 2 Wall Lines
- Nozzle: 0,4 mm
- Infill: 10% - 15%
- Infill Pattern: I always recommend Gyorid (as an Engineer I know that the Gyroid Pattern is always the best choice because of its efficiency)
- material: OVERTURE Matte Brown PLA (Amazon), OVERTURE Matte Light Brown PLA (Amazon), OVERTURE Matte Black PLA (Amazon), OVERTURE Matte Yellow PLA (Amazon), OVERTURE Matte Yellow PLA (Amazon) :)
- If you have any questions about printing, feel free to contact me on Discord or just on Thangs.
- I recommend to put some glue on the print bed to get an 100% print after all!
- IMPORTANT! To install the Push Button mechanism - you need to buy two compression springs on Amazon - the details to the compression springs are (length 35mm; diameter 9mm; strength 0,9mm).
- BUT of course there is a normal model version without the push button mechanism :)
IMPORTANT
-
This model can be used for private use and for a commercial use. If you want more, feel free to purchase my EPIC plan. Start with the Starter Plan and get one model for free!
-
This is a hand made project - and not an official Nintendo product!
Switch2 Docking Station Stand - Inspired by Donkey Kong - Fan Art
701 downloads · 11 months ago in and
Universal Controller Stand - Inspired by Ryu from Street Fighter
Predator Universal Controller Stand
Protection Glasses Case - Inspired by Milwaukee
DIY Universal Gaming Controller Stand - Inspired by Prince Broly (Old Version)
3D Printed Gaming Map - Inspired by "Cache" Fan Art
Mechanical Gaming Desktop Stand
Gameboy Box - Inspired by Medieval Tower Games
Graded Card Case - 3 in 1 Slab Case
Diorama Switch2 Stand - Inspired by furniture like Kallax from IKEA
DIY Universal Gaming Controller Stand - Inspired by Broly
Modern Desk Organizer - for Pencils and More
Gaming Combi Stand - Generic Version (minimalistic deco)
Anime Based Phone Snail - Universal Controller Stand
Generative Table Legs
Santas House Diorama - Christmas Home Decoration
DIY Universal Controller Stand - Bartholomew Bear Inspired by One Piece
Spooky Church - Halloween Special - No supports
Duo Gaming Controller Stand - Inspired by Kaijo No 8
Candy Skull - Inspired by Frankenstein Monster - Halloween Special
I printed the game holder version but the springs seem to be too strong for the tab to hold. I used the ones you recommended buying off amazon.
Okay thank you for the information! But I have to say, that I tried it several times and everytime everything was good. Have you done everything in a correctly way? :)
Amazing !!! Congratulations
(sorry about my poor English)
I just have one question:
The barril, is only multicolor using the GCODE, but with the GCODE is not possible to change anything, for example, Gyroid, like you said. How can change this settings to still use multicolor?
If you want to change something - you need to slice it by yourself. Otherwise you have to print it like I presetted it for you! :)
why is it that when i import the model, it comes in as 1 color, is there a multi color print file available???
It is not a fully multicolor print - because you don´t need the AMS to print this model. If you have not an AMS you further need to adjust your print settings on the slicer software and than to change the colors while printing. :)
hello ive downloaded this model and another one, and the files are empty. whats should i do? how do i contact you other than leaving a commet on the post? on the other file i downloaded, for the controller holder, i only got the hand in a file. can you help?
I downloaded this file by myself for testing out if the files are empty and what you write here is not true. There are a lot of g-codes files and stls for different printers!
Hi. Is it possible to use it for Switch first edition? Or is only made fo the second one?
You can use the first Switch too. :)