ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, monthly ACTIVE membership is required through one of two available platforms below:

https://linktr.ee/flexifactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file. .........................................................................

If you are into the zodiac at all, you may be surprised to learn both my wife and kiddos are Scorpios! So this design was a must-do and an absolute blast to work on.

I really enjoy the fully print-in-place models, especially with the amount of articulation this character has. It is easily printable in a variety of sizes and looks amazing in gradient silk pla.

The 3mf provided has a Scorpion from Mortal Combat vibe for you gamers that may be familiar 😎🎮 Thanks to @dragon1776 for the Silver Rub and Buff on black pla idea 🔥 My wife did a killer post apocalyptic battle bot paint job on this 205% Cyber Scorpion in about 20 minutes!

And I also wanted to mention members get 40% off my older scorpion too. The original can print smaller and has a 3mf and xl version too :) Flexi Factory Scorpion HERE: https://thangs.com/designer/flexifactory/3d-model/Flexi%20Factory%20Scorpion%20with%20XL%20and%203MF%20versions%20Included%21-1275713

And I have added an XL version with a glue on tail for those that want to supersize this creepy crawler!!! (scale as large as your plate)

Included are 7 files:

*Cyber Scorpion 3mf Project file *Cyber Scorpion 3mf Cut file for XL Version *Cyber Scorpion STL Print-in-place *Cyber Scorpion Cut STL Body *Cyber Scorpion Cut STL Tail *Cyber Scorpion Cut STL Right Claw *Cyber Scorpion Cut STL Left Calw

Also Optimized for AMS, meaning if you are using a Bambu or Prusa with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

Check out my other models.

https://thangs.com/designer/flexifactory

Affiliate link to my supplies used in the photos above can be found here: https://www.amazon.com/shop/flexifactory

*As an Amazon Associate I earn from qualifying purchases.

3D printing settings I successfully test printed between 60% and 150% for this one. You can go big, no problem. The smaller versions have the littlest legs, so use high quality materials and settings. I personally feel 70% is as small as you should go.

STL and 3MF files are included. * If you use the 3mf file, please remember that it is a painted project file for your convenience. You must check your material/printer/settings to make sure it works correctly for your printing project.

I print with, 15% infill/gyroid, .12 or .16 layer height for quality.

As usual, make sure you have good adhesion, especially for the smaller versions. A glue stick works or I have switched to using on all my machines... a BIQU Cryopgrip Frostbite adhesion plate.

Gradient PLA works well with this model: I have a comprehensive list of Filament I use here: https://www.amazon.com/shop/flexifactory