This keychain mine is designed to blast your stress away!
I wanted to design a keyboard switch clicker, and what's better than an AT... I mean AS mine with a ratcheted or free spinning fidget spinner twist!
Printing tips: No supports required. The parts are already oriented optimally.
If you're using Orca Slicer or Bambu Studio, a handy project file is included that has my print settings and painted trigger plate ready to go!
Assembly To assemble you need a mechanical keyboard switch such as Cherry MX (blue is the clickiest). You can get them for cheap from AliExpress stores like this one, so you don't have to start disassembling your keyboard. You need it to write feedback for my models! You can also find switches on Amazon, but I haven't ordered any from there myself so I can't recommend any store.
I recommend adding some silicone spray or other lube between the spinning parts of the mine body, especially if you're printing in matte filament!
Check out the quick assembly guide with some helpful pictures at the right side of this page!
If you enjoy my designs and want to sell prints of them, I have membership tiers with commercial license available! Also if you want to support me while getting access to all my premium designs, I have a cheap personal tier. Please check out my membership plans! ❤
Align and press the cross-shaped pin into the cross-shaped hole in the trigger plate. It might require a bit of force, press it in hard! Align the switch to round hole at the bottom of the mine body and press it in. If it's too loose, you can add some glue. Ready to click and spin!
.png&w=256&q=75)