🎃 Build-a-Gnome Halloween Add-On STL Bundle – Pumpkin & Witch Hat 🧙‍♂️ Bring spooky charm to your gnome collection with this Halloween Add-On Bundle – specially designed for the Build-a-Gnome base model (sold separately). Perfect for Halloween decor, fall displays, or festive shelf sitters! This seasonal bundle includes:

• A classic Jack-o’-Lantern pumpkin – ready for tricks or treats!
• A whimsical Witch’s Hat – spooky and stylish! Important: This listing includes STL files only for the hat and pumpkin. You must own or purchase the Build-a-Gnome Base Model to use this bundle:
  https://than.gs/m/1384082

Features:

• NO AMS NEEDED: This model is designed to print by piece and color! You don’t need an AMS to print this model which also means it prints faster and with much less wasted filament.
• Modular Assembly: All base pieces are engineered to fit together easily*, making assembly simple and satisfying. This also allows you to use this base model with the add-ons without needing to reprint parts you have already made! The pieces with each add-on will fit seamlessly with the base gnome. *Minimal glue needed for some accessories for permanent hold.
• Commercial License Included: Sell your finished prints with confidence — license included with purchase, no subscription required!

Included in This Listing:

• STL files for the pumpkin and witch hat (as shown in the photo)
• Clean, support-light design optimized for easy printing
• Commercial license included — no subscription or extra fees needed Whether you're decorating your home or selling seasonal items, this modular gnome is a must-have project for your 3D print lineup. Start your collection today and let your gnome evolve with every season!

SAFETY NOTE: This model contains small parts that may present a choking hazard. It is not suitable for young children or pets. For decoration purposes only.

👻 Add a little Halloween magic to your gnome today – and check back often, the Build-a-Gnome collection is always growing!

Assembly Note Some of the accessory pieces will have tight fits to hold parts together without glue. If you have issues with fit, please feel free to reach out to me and I will be happy to assist you. If your machine does not have very precise or accurate tolerances, you may want to scale the models up or adjust your precision settings. Scaling down model will not work as the tolerances will likely be too small for the pieces to fit.
For most accessories for this gnome, you will be required to remove a hand or hands to place the accessory in the gnome’s hands. Glue is not needed for most of the parts of these models. We do recommend it when you want permanent adhesion of for certain small parts. Print tolerances vary by printer. The settings used in this print were in Bambu Studio, and printed on a Bambu X1C using a 0.4 nozzle printed at 0.20mm layer height Standard print quality settings. Filament used was PLA and PLA+. Plate used was Bambu Textured PEI Plate. Adding variable height, ironing or smaller layer heights will decrease the visibility of any lines even more than what is shown in the photos. Recommended Print Settings:

• Supports – YES for some parts
• Support Type - TREE SLIM
• Supports on Build Plate Only
• Threshold Angle - 30 degrees
• Remove Small Overhangs - NO
• Brim – YES – Only on small pieces or if you have adhesion issues
• Top Z-Distance - .28
• Bottom Z-Distance - .28
• Layer Height – 0.2mm or smaller
• Nozzle Size – 0.4 or smaller
• Seam – position depends on piece and orientation on the plate
• Infill – 10 - 15%
• Wall Loops - 2