Fanart of some big robot warriors - Standing tall and ready for battle - set of bookmarks
Week 59 is here - first set is some robot bookmarks.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Maroon Red (10205) Transmission Distance: 3 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Maroon Red (10205) At layer #11 (0.96mm) swap to Cyan (10603) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.
























