This is the complete AMPro direct replacement front double wishbone set. One order has every single part attached by a small sprue or pin. This comes in SLS Nylon (shown in the video, painted) or MJF which is stronger. We recommend no more than a stock motor be used. Be careful with the cosmetic shock mount as it is very weak in comparison to the structural one. This will work with the stock front springs.

This will not work with the Grasshopper body without significant modifications.

See video before your purchase.

You will need: 1: m3 ball studs (4 of them) with corresponding ball cups (4 of them). 2. m3 threaded rod for the upper link 3. screw pins with at diameter of 3mm (2 of them, 30mm or longer) 4. M3 self tapping screws (a half dozen or so, no longer than 12mm) 5. 3mm drill bit to chase the printed holes