These textured open-back cones are compatible with the open-sourced Head(amame) Headphones V2.

To complete your set of headphones you will need to:

• Download and print the remaining pieces from https://than.gs/m/908651
• Purchase electronics from https://headamame.com/

Assembly instructions can be found here: https://youtu.be/2iNJaU211fA

This open-back design allows air to pass through the ear cups from the rear of the speaker driver reducing resonances and low-frequency build-up that would be caused by a rear enclosure. Open-back designs are your best open for clear and natural sound.

Biomorphic Headphone Stands:

More Heada(mame) compatible designs: Gyroid Cones Single Extruder: https://than.gs/m/930949 Gyroid Cones Double Extruder: https://than.gs/m/930954 Diamond Cones: https://than.gs/m/956822

Print two each of the “Cone Top” and “Headband Attachment” files and one of the “Cone Bottom Left” files. Depending on whether you have a mic, print either the “Cone Bottom Right no Mic” or “Cone Bottom Right with Mic” file.