Princess Ariel has had enough and has changed her outfit to Defend her People - Set of bookmarks
Another different look at a fairytale princess.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue (10604) Transmission Distance: 5 PLA Bambu Labs Matte Sky Blue (11603) Transmission Distance: 2 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Blue (10604) At layer #11 (0.96mm) swap to Sky Blue (11603) At layer #16 (1.36mm) swap to Beige (10201) for the rest.
























