Each era has it's hero and protector - Set of Bookmarks
Third set for this week - A look at the heroes of different time periods in a classic pulp character style.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Green (11501) Transmission Distance: 0.5 PLA Bambu Labs Matte Matte Caramel (11803) Transmission Distance: 2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Dark Green (11501) At layer #15 (1.28mm) swap to Matte Caramel (11803) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.
























