Now they are using Goldfish to monitor us!! - Hueforge Art
Last piece for this evening - Mechanofish
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Nardo Gray (11104) Transmission Distance: 1.5 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 PLA Bambu Labs Basic Sunflower Yellow (10402) Transmission Distance: 4.8 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Ivory White (11100) Transmission Distance: 3.5 This print uses 6 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Nardo Gray (11104) At layer #12 (1.04mm) swap to Pumpkin Orange (10301) At layer #15 (1.28mm) swap to Sunflower Yellow (10402) At layer #17 (1.44mm) swap to Black (10101) At layer #18 (1.52mm) swap to Ivory White (11100) for the rest.






















