Celebration of the Black Lovable Dragon through Fan Art - Hueforge Design
4th piece is a tribute to the wonderful animation.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used: PLA Bambu Labs Black Transmission Distance: 0.3 PLA Bambu Labs Matte Nardo Gray (11104) Transmission Distance: 1.5 PLA Bambu Labs Matte Grass Green (11500) Transmission Distance: 2 PLA Bambu Labs Matte Scarlet Red (11200) Transmission Distance: 2 PLA Bambu Labs Matte Desert Tan (11401) Transmission Distance: 1.1 This print uses 5 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Nardo Gray (11104) At layer #13 (1.12mm) swap to Grass Green (11500) At layer #14 (1.2mm) swap to Scarlet Red (11200) At layer #17 (1.44mm) swap to Desert Tan (11401) for the rest.






















