Rocking the Woodstock look - Doggie Dress up with Guitar and all - Wall Art
A couple Art pieces to share tonight - First up is dressed for Dogstock.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.29x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Black Transmission Distance: 0.3 PLA Bambu Labs Matte Dark Chocolate Transmission Distance: 0.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Dark Chocolate At layer #12 (1.04mm) swap to Beige (10201)
Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White (10100) for the rest.






















