Michael M
BooneCo3d1.6K followers
Follow
BooneCo3d
BooneCo3d
|
Image 1 of 2
What if cuteness just fit in your hand like these animals - Set of bookmarks 3d model
BooneCo3d
BooneCo3d
|
Image 1 of 2
What if cuteness just fit in your hand like these animals - Set of bookmarks 3d model
What if cuteness just fit in your hand like these animals - Set of bookmarks 3d model
What if cuteness just fit in your hand like these animals - Set of bookmarks 3d model

What if cuteness just fit in your hand like these animals - Set of bookmarks

Subscribe for access starting at $10 USD
Get access to this model and 825+ more

First bonus for this week - Some handheld animals

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Matte Dark Brown (11801) Transmission Distance: 2 PLA Bambu Labs Basic Gold (10401) Transmission Distance: 3.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Dark Brown (11801) At layer #12 (1.04mm) swap to Gold (10401) At layer #16 (1.36mm) swap to Beige (10201) for the rest.


Discussions

What if cuteness just fit in your hand like these animals - Set of bookmarks

11 downloads · 11 months ago in 
Michael M
BooneCo3d1.6K followers
Follow
Subscribe for access starting at $10 USD
Get access to this model and 825+ more

More models