Artistic style on display -cloisonne style depictions of animals both real and fantasy - bookmarks
Week 57 set 3 - Some interesting animals to share.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2 PLA Bambu Labs Basic Orange (10300) Transmission Distance: 5.6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Green (10500) At layer #13 (1.12mm) swap to Orange (10300) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.
























