Today's look - the modern dress of the generation - Wall art hueforge
2nd bonus art - just 3 colors. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 114.29x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 PLA Bambu Labs Basic Magenta (10202) Transmission Distance: 4.6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 3 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #10 (0.88mm) swap to Magenta (10202) At layer #14 (1.2mm) swap to Jade White (10100) for the rest.






















