Stitch Day (6/26) is tomorrow and we wanted to give you guys a few Stitch prints for you to print. The key chains shown in the image were printed at 150% scale. Stitch playing the guitar was printed at 100% scale.

Filament Colors Used

• Numakers Pitch Black
• Numakers Magenta
• Numakers Royal Blue
• Numakers Atomic Pink
• Numakers Ivory
• Numakers Beige Brown
• Numakers Dark Gray
• Elegoo Sky Blue

Numakers Affiliate Link: https://numakers.com/PixelDesigns3D Numakers Coupon Code: PIXELDESIGNS

Printing Tips

Each color is at a different height. If you do not have an AMS, you can pause and swap colors. In addition, some models may have more than 4 colors. If you do not have an AMS adapter, you can use the same method to swap colors.

When scaling in the slicer, it is recommended that you scale based on X and Y coordinates only. This will leave the Z height the same and keep any color changing to a minimum by keeping the layer height smaller.

For the keychains, there is a keyring loop model in the STL folder and in the .3mf file. The keyring loop can be moved around. After placing it where you want it, select the model and keyring loop. Select "Merge" to combine the files together.

You can add negative space in the slicer program to have a place for magnets or create a keychain or earring hole.