Mulan - the swordswoman and the warrior - Set of bookmarks
Another bonus tonight of a warrior woman. Reminds me of Mulan.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Matte Charcoal (11101) Transmission Distance: 1.5 PLA Bambu Labs Matte Dark Blue (11602) Transmission Distance: 1 PLA Bambu Labs Matte Mandarin Orange (11300) Transmission Distance: 3.2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Charcoal (11101) At layer #8 (0.72mm) swap to Dark Blue (11602) At layer #11 (0.96mm) swap to Mandarin Orange (11300) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.
























