2 Pane Wall Art - The beauty of the riverside and buildings Oil Painting - Hueforge
Third piece is a little different than my typical. It is also two pane and uses 6 colors to get the gradients.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Indigo Purple (10701) Transmission Distance: 2 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 6 unique filaments
Swap Instructions: Start with Black (10101) At layer #11 (0.96mm) swap to Indigo Purple (10701) At layer #12 (1.04mm) swap to Cyan (10603) At layer #13 (1.12mm) swap to Red (10200) At layer #17 (1.44mm) swap to Yellow (10400) At layer #23 (1.92mm) swap to Jade White (10100) for the rest.























