Second share tonight. This is also a two panel piece. All the color switches are the same for both pieces. The road traveled. Either side can be shared alone as well.

For these models:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 160x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Red (10200) At layer #14 (1.2mm) swap to Pumpkin Orange (10301) At layer #20 (1.68mm) swap to Yellow (10400) for the rest.