3d_factorybox5.9K followers

Universal Controller Stand - Inspired by Majin Buu from Dragonball - Fan Art 3d model

Universal Controller Stand - Inspired by Majin Buu from Dragonball - Fan Art

2.7K downloads · 1 year ago · Hi guys, here comes my brand new Universal Controller Stand - Inspired by Majin Buu from Dragonball!

Description

Hi guys, here comes my brand new Universal Controller Stand - Inspired by Majin Buu from Dragonball! I am personally a big fin of the Dragonball Fighting Games on PlayStation - especially DragonBall Sparking Zero. This controller stand is universal and can match with most of the common console controller on the market! More from the DragonBall Super Villain Collection 5/5 coming soon! ;)

PRINT SETTINGS:

printer: Anycubic Kobra S1
NO supports!
2 Wall Lines
Nozzle: 0,4 mm
Infill: 10% - 15%
Infill Pattern: I always recommend Gyorid (as an Engineer I know that the Gyroid Pattern is always the best choice because of its efficiency)
material: pink matte pla (3d hojor official website), Black Matte PLA (3d hojor official website), Black Galaxy Matte PLA (BambuLab Official website), White Matte PLA (3d hojor official website), Silk Gold PLA (3d hojor official website) :)
If you have any questions about printing, feel free to contact me on Discord or just on Thangs.
I recommend to put some glue on the print bed to get an 100% print after all!

IMPORTANT

This model is for private use only. If you want more, feel free to purchase my EPIC plan. Start with the Starter Plan and get one model for free!
This is a hand made project - and not an official Dragon Ball Z product!

Tags:

Community Makes (3)

Una pasada! Mil gracias no puedo estar más contento y agradecido

Love it! The medallion base should be pushed back a bit, otherwise it's just a tiny strip of plastic connecting the pieces. Just my 2cents. The controller doesn't feel secure, but maybe I'm doing it wrong. It works though.

Otherwise...Glorious.

I also messed with my buddy, "Buu watch you poo."

Great model!! I finished them for my son. Thank you!

Community Makes (3)

Discussions

sumner231 year ago

Great model!! I finished them for my son. Thank you!

3d_factorybox1 year ago

Wowww - Super nice Buddy! Thank you for that make! :)

strength11 months ago

Love it! The medallion base should be pushed back a bit, otherwise it's just a tiny strip of plastic connecting the pieces. Just my 2cents. The controller doesn't feel secure, but maybe I'm doing it wrong. It works though. Otherwise...Glorious. I also messed with my buddy, "Buu watch you poo."

PrinterCreality CR-10 S5

MaterialPETG

3d_factorybox11 months ago

Amazing - such a nice print! :)

javi.sacra11 months ago

Una pasada! Mil gracias no puedo estar más contento y agradecido

PrinterCreality Ender 3 V3

MaterialPLA+

jonbreedon11 year ago

Ok so this is the ONLY hand I’m having issues with. This is my third attempt. I don’t know what the issue is with this. I’ve sliced it new each time and made sure the bottom is at the bottom. First one I left unattended and it just turned into spaghetti. Second went half way and fell over. This is my third. I don’t know why it’s not making the layer on the left side as you can see. So that’s why it topples. It’s just registering as it’s flat for some reason? Like it seems to skip. I was watching it in person and it’s like ghost layering it is the best I can describe it. You can see it makes the bottom fine at first but it’s just that one spot that doesn’t take. Any suggestions?

3d_factorybox1 year ago

So, to me, it looks like you made a mistake. You need to place the bottom, straight side on your print bed. Then it will work. There's a function in the slicer that places the STL file straight on the print bed. These are basics that I assume you've mastered, buddy. Please try that first, please.

jonbreedon11 year ago

Also I don’t know why my filament looks like shit. I’ve had extremely smooth prints like shown in your photo. Maybe mines messed up? I’m gonna dry it and try that pink again but I’ve never had issues before. I don’t know. I just want it printed nicely that’s all I ask for. Print gods, please hear my plea…

3d_factorybox1 year ago

First of all - try out what I recommend below. After that you will see that you will got much better results! :)

jonbreedon11 year ago

Ya I’ll do it once I get home. I’m just on set with a tv show that’s begun its second season of filming. And I’m DYING in this heat. But I’ll update once I print again! As I said your designs are always flawless it’s just something I did on my end

3d_factorybox1 year ago

Yes buddy, try again and let me know if there is working wrong again! :)

brent01213 months ago

omg i finaly figured out … BRIM !!!!!!

3d_factorybox3 months ago

;)

3D Gladiator5 months ago

Have you considered making a patreon?

3d_factorybox5 months ago

Hi buddy, why? Thangs is better as Patreon for 3d designers like me. :)

richardbenitez122010 months ago

No encuentro como imprimir la parte blanca siempre se despega

3d_factorybox9 months ago

Maybe you have to clean your printbed first of all :)

byrodri21stream11 months ago

Hello! I printed the spokes and they fit well, but when I put the hand base on, the spokes move out of place and I can't put them in. Any suggestions? I'm waiting for a reply. Thanks.

3d_factorybox10 months ago

Hi, I don´t know what you mean with "spokes". :)

fanfusionforge11 months ago

I noticed Buu is the first Dragon Ball stand with a lightning insert, is it possible for an insert like that on the previous Dragon Ball stands?

3d_factorybox9 months ago

Hi buddy, where do you see a lightning insert ? xD But finally this is a very good idea - maybe I will realize it for the next models :)

phantongame1 year ago

Boa noite nao estou consequindo imprimir a pate branca da mao ja tentei umas 5 vezes e ela solta imprimi todos so a parte branca q nao vai fiz uma assinatura hoje com 30 downloads

3d_factorybox1 year ago

Hi, have you used the settings I recommend in the model description? :)

View all 19 discussions