MOONRAKER SPACE SHUTTLE 1:200 SOLID ROCKET BOOSTER ENGINE NOZZLES [FICTIONAL]

These parts will work on the AMT 1/200 Moonraker Space Shuttle with Boosters model kit #AMT1208/06 and kits that come from the same molds such as the Lindberg No.91007 kit.

You will have to drill two holes centered between parts 1 & 2 to mount this part. To assemble the parts you will need to place part 3 over the Booster Engine Nozzle then close parts 1 & 2 over the stem of the Nozzle. Then push part 3 over the ends of the joined parts 1 & 2 as shown in the kit instructions.

I will post a video of the process in the future.

ADDITIONAL PARTS AVAILABLE (OR INPROGRESS)

Replacement Part 8 (Model Stand) - Necessary to place the Orbiter stack on the Base with the increased height of the Booster Nozzles.

SRB SEPARATION ROCKETS

SSME NOZZLES - DETAILED SPACE SHUTTLE MAIN ENGINE (PRATT & WHITNEY) ROCKETDYNE RS-25 NOZZLE REPLACEMENT PART 22 x3

OMS NOZZLES - DETAILED ORBITAL MANEUVERING SYSTEM NOZZLES

ACCURATE SRB ENGINE NOZZLES PER NASA DESIGN