Sometimes another day will simply wear you to your bones - set of Bookmarks
Week 55 bonus set is a little different. a saying with a skeleton.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Red (10200) Transmission Distance: 3.7 PLA Bambu Labs Matte Grass Green (11500) Transmission Distance: 2 PLA Bambu Labs Basic Light Gray (10104) Transmission Distance: 2.8 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Red (10200) At layer #14 (1.2mm) swap to Grass Green (11500) At layer #20 (1.68mm) swap to Light Gray (10104) for the rest.
























