The midnight prowler - a black panther in the moonlight (cat not guy) - set of bookmarks
Week 55 - 3rd set of bookmarks is of a big cat.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Cyan (10603) Transmission Distance: 8 PLA Bambu Labs Basic Purple (10700) Transmission Distance: 5 PLA Bambu Labs Basic Turquoise (10605) Transmission Distance: 1 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #9 (0.8mm) swap to Cyan (10603) At layer #14 (1.2mm) swap to Purple (10700) At layer #20 (1.68mm) swap to Turquoise (10605) for the rest.
























