Robin (Bangboo) MULTICOLOR PRINTING REQUIRED This model set includes parts for the Robin Fridge Magnet/Keychain

Magnet models (in this case, the hook stl file) are designed to fit 10mm by 3mm sized circular magnets! Here is a link to the ones I've used: Magnet Amazon Link

Adhesives like super glue will be necessary to keep together

As you may have seen in the videos on social media, this model uses wrist straps attached to Robin's grapple gun. Here is the link to the ones I used in the video: Wrist Strap Amazon Link

Robin Model Parts This set also has Robin part files for better print times. This will require assembly after all the pieces are printed. Multi-color printing is still required for each piece (Minimum 4 colors). Adhesives like super glue will be necessary to keep together

Parts that Appeared on IG/TikTok These files are the exact stl files used in the IG reel/TikTok!

• Robin_Body_Grapple.stl
• Robin_Cape.stl
• Robin_Face.stl
• Robin_Head.stl
• Robin_Hook_v1.stl (may add an updated version later)
• Robin_3mf.3mf (all parts colored, has a different version of the hook included)

Other Pieces Included This was a version that I was going to use before but ended up scrapping but thought I would include it here anyway

• Robin_Body_Normal.stl (may add an updated version later)

This work by Pneuma3D is licensed under CC BY-NC-SA 4.0