Bob Marley Wall Decor

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm You may print at higher layer heights below the Base Thickness of 0.48mm

The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:

• #080a0d PLA Black Transmission Distance: 0.3
• #a88d5d PLA Overture Easy Caramel Transmission Distance: 5
• #fb0a09 PLA Matte Red Transmission Distance: 7.2
• #fce300 PLA Basic Yellow Transmission Distance: 6
• #000000 PLA Black Transmission Distance: 8

This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Easy Caramel At layer #13 (1.12mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #41 (3.36mm) swap to Black for the rest.