Last sign for the night. Yes, political. Free for everyone.

For this model:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Cobalt Blue (10604) Transmission Distance: 0.5 PLA Bambu Labs Matte Scarlet Red (11200) Transmission Distance: 2 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments

Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Cobalt Blue (10604) At layer #14 (1.2mm) swap to Scarlet Red (11200)

Border Only Colors from here until the end. At layer #20 (1.68mm) swap to Jade White (10100) for the rest.