fanart depictions of a halo guardian - armor and weapons ready - set of bookmarks
Week 54 first bonus - master chief from Halo.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2mm
Filaments Used: PLA Bambu Labs Matte Terracotta (11203) Transmission Distance: 1 PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Blue (10601) Transmission Distance: 4 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Terracotta (11203) At layer #11 (0.96mm) swap to Black (10101) At layer #15 (1.28mm) swap to Blue (10601) At layer #17 (1.44mm) swap to Jade White (10100) for the rest.
























