Umea industrial - a new version to the famous Umea floor lamp

Elevate your home with this clean and elegant floor lamp. The 3D printed shade diffuses the light for a warm feeling in your living space. Featuring a tripod design which stands out from all other designs Umea is an eye catcher in your home.

Size & Scaling: The biggest part is the shade which requires a build volume of 250x250x250mm Scaling is not impossible but all dimensions are suited for M6 bolts, nuts and so on. This version is designed for 27x2mm steel pipes; other pipe sizes (copper, aluminium) will be added upon request. Log: Also fits American NPS 3/4 Sch. 5s pipes A version for 25x0.5 and 25x1 is added (25mm shade/top & the corresponding insert/spanner starting with 25)

Print settings: _Shade: _ prints in vase mode upside down 0.2mm layer height 5 bottom layers set line width to 0.7/0.8mm

Top: prints upside down 0.16mm layer height 3 walls minimum

Cap: 0.2mm layer height 2 walls 2-5 bottom layer 0 top layer 0-30% gyroid add height range modifier: 0% infill after 1mm Play around with number of bottom layers and infill the create the same diffusion als the shade itself

Filament: For the shade use some transparent filament. I used Bambulabs translucent PETG gray to create that industrial look.

Additional hardware: 3x steel pipes diameter=27mm; wall thickness 2mm; L=1370mm 3x M6x40 countersunk bolts 3x M8 hex nut 1x E14 or E27 light cord