Geoguessr champion by day, virtual diva by night. Give it up for AZKi and her trusty Microphone Lightsaber! Portable, stylish…and deadly. She is gonna ZeroGuessr her way to the heart of “Pioneers” around the world.

This is her microphone lightsaber (mic lightsaber? mic saber?) as seen on this HoloGra episode: https://www.youtube.com/watch?v=O76GOs7iywQ

The microphone is similar to Shure SM58 and includes details such as a XLR port in the bottom of the grip, a microphone wire mesh that prints separately, and the (HO58) logo from the episode. No glue required for this model!

Tree supports are recommended for parts like the Mic Ring, Handle Top and Mic Top. Handle Bottom is optional for the suspended center inside the handle, depends on the bridging ability of your printer. You can increase your “Top Z Distance” to make supports slightly easier to remove.

The Text Ring can be printed with an AMS system, or with manual filament swaps. While it takes longer, its a small piece. When opening in your slicer: Hold CTRL, click on the Text Ring+HO58 Logo parts to open as "single object with multiple parts". This will load both parts together and you can assign individual colors more easily.

It's recommended to print the Wire Mesh with either a .2 nozzle or around .10 layer height. The wire is thin enough that the walls can curl up and get hooked on the nozzle, pulling the part off the plate. Thinner layers and printing multiple silver parts in the same plate can help layers cool more evenly. Maybe you can print two lightsabers and dual wield!

You can print the blade sections individually or together as a set. The blade is designed specifically for this model, no guarantee other collapsing sword blades will fit.

Printed here in Polymaker Black PLA, White PLA, Silk Silver PLA and Protopasta Cupid's Crush Metallic Pink HTPLA.