Sometime a dragon just has to sit, other times it is protecting something - Set of bookmarks
Week 53 bonus set 1.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Green (10500) Transmission Distance: 2 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Green (10500) At layer #11 (0.96mm) swap to Beige (10201) At layer #19 (1.6mm) swap to Jade White (10100) for the rest.
























