Ofelia Pendant Lamp - Lamps & Lighting by Lunfardo
This model is part of the series of pendant lamps with diffusers that we designed, which were very successful in Lunfardo’s lighting catalog. The design was created for home décor, and we used our RippleMesh texture along with a distinctive pattern.
What's included • The Ofelia Pendant Lamp with our signature RippleMesh texture, in two sizes • A step-by-step instruction file to help you replicate the result shown in the photos
Model dimensions Based on how the model is positioned on the print bed: • Ofelia 215: X: 215.14 / Y: 215.14 / Z: 118.80 • Ofelia 298: X: 298.56 / Y: 298.56 / Z: 136.80
Recommended slicers • Bambu Studio or PrusaSlicer
What you'll need to print • 0.4 mm or 0.8 mm nozzle • PLA or PETG
What you'll need to assemble • E27 screw socket with two nuts — see photos for reference • We recommend watching the assembly video included in this listing
Safety note • If you’re using PLA, the bulb must be a low-consumption LED. We also recommend this type of bulb if you’re using PETG • Always turn off the power before any installation
Related products Lola | Ara | Fiore | Seamless | Betty | Julian Table Lamp | Sofía Pendant Lamp | Sofía Wall Lamp | Josefina Adaptive Lamp
Looks great! 🔥
Hi, I bought this lamp, but when I print, the base separates. It's very thin. Can you help me?
Hi, how are you? Did you follow the printing instructions for this model exactly? I’m asking because this isn’t an error we’ve experienced before. If the problem persists, write to us on Discord or Instagram so we can talk in more detail about it.
Hi, thanks. I've already solved it. I actually missed a step. Regards.
Great! If you’d like, you could show how it turned out once printed.