Solo Leveling Sung Jin-woo - Printing Instructions Included

Assembly As shown in the photos above but also numbered on the STL Files

All the necessary printing instructions are included in the file. If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice. Also, make sure to have a strip light of your choice for the lighting.

For Commercial Use & More: https://www.patreon.com/c/ACSPARK3D or https://than.gs/u/1342772?plans=true

Enjoy showcasing your Solo Leveling Sung Jin-woo lightbox!

Note to always put the transparent layer last

LightBox Frame Settings: Layer Height: 0.2 Walls: 2 Bottom: 2 (Or 3 to hide infil lines) Top: 2 15% Infil

LightBox Back Plate Settings: Layer Height: 0.2 Walls: 2 Bottom: 3 Top: 3 10% Infil

LightBox Transparent Layer: Layer Height: 0.2 Walls: 2 Bottom: 2 Top: 2 1% Infil

Design Layer Settings: Layer Height: 0.2 2 Walls 2 Top/Bottom 3% Infil No supports.