A little leafy Stegosaurus friend, and a little bonus dice roller!!

When I first designed the Ankylosaurus flexi a few months ago (yesss, it took me that long to take pictures and post it!! aah), my friend asked me if I could make a matching volcano dice roller, so they could have DND dino pals to take with them to the board game store. I made a rough one in blender, but never got around to printing it until now.

It took a few tests to get the proportions how I wanted them and it was hard to find time to do test prints between models, but this roller can roll a full-sized D20, while not being super large/wasting a lot of filament, so I'm finally able to post it now!!

Hi there! I'm Mouse and I love art & 3D printing. I am inspired by cottage-core, fantasy, and kawaii things! Thank you for taking the time to read this. :)

If you like this design, please check out my other models: https://thangs.com/designer/StarMouse3D

StarMouse3D creations are protected by copyright. These files are for personal use only, and you do not have the right to sell the files or the models without explicit consent from me.

To legally obtain permission to sell PHYSICAL prints you may obtain permission to sell every model as an active Thangs supporter through this link: https://thangs.com/designer/StarMouse3D

Please do not share digital files! Thank you.

Please be warned that these models are not recommended to be printed for young children, or anyone at risk of a choking hazard. There are small parts that can be broken off if roughly handled. Print at your own risk!

Recommended Print Settings:

Layer Height: .16 Infill: 15% Supports: Not needed Adaptive Layer Height recommended (but will slow print down) Pro Tip: If the first layers struggle to stick, try slowing down your first layers or increasing the bed temp slightly.