The sounds of a guitar ring through the streets - Set of 3 Bookmarks
Week 52 set 3. Depictions of city streets and a guitar roaming the town.
For this model:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Pumpkin Orange (10301) Transmission Distance: 5.5 PLA Bambu Labs Basic Yellow (10400) Transmission Distance: 6 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #10 (0.88mm) swap to Pumpkin Orange (10301) At layer #15 (1.28mm) swap to Yellow (10400) At layer #18 (1.52mm) swap to Jade White (10100) for the rest.
























