Majin Vegeta Led Lightbox - Printing Instructions Included 😊

You can replace the gold color with a darker yellow and the rest 2 yellows with a lighter variation. All the necessary printing instructions are included in the file. If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice. Also, make sure to have a strip light of your choice for the lighting.

Assembly As shown in the photos above but also numbered on the STL Files

For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Majin Vegeta! - LED Lightbox

LightBox Frame Settings: Layer Height: 0.2 Walls: 2 Bottom: 2 (Or 3 to hide infil lines) Top: 2 15% Infil

LightBox Back Plate Settings: Layer Height: 0.2 Walls: 2 Bottom: 3 Top: 3 10% Infil

LightBox Transparent Layer: Layer Height: 0.2 Walls: 2 Bottom: 2 Top: 2 1% Infil

Design Layer Settings: Layer Height: 0.2 2 Walls 2 Top/Bottom 3% Infil No supports.