🎨You can find the multicolor version of this model on my Thangs page. https://than.gs/m/1341128

💰 You can obtain the commercial license for this model by joining my Thangs Membership or Patreon at the Merchant Tier or above.

🔔The keychain model is designed to use a 15mm (diameter 0.8mm) ring.

🔔This model requires keyboard switches to function properly.

🔔Proper support is needed for accurate printing, particularly at the bottom of the eggshell plate and the underside of the peak. It’s recommended to print the eggshell and the bird separately. Use tree supports for the bird and standard grid supports for the eggshell.

🔔Printing in 0.15mm layer height is recommended.

🔔You may need to perform post-processing on the models, such as smoothing sharp edges and ensuring the separate parts are securely attached for safety.

🔔Add brim or apply glue to the bottom if extra adhesion is needed.

🔔The rendered images are for reference purposes only, and any silver ring shown in the pictures is not included with the model.

❗Please do a test print to ensure quality before starting a mass print.