fantasy paintings of the heroes - sorceress, warrior and thief - set of bookmarks
4th Bonus set tonight - some very cool artistic depictions of fantasy characters.
For these models:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 66.89x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used: PLA Bambu Labs Basic Black (10101) Transmission Distance: 0.6 PLA Bambu Labs Basic Bronze (10801) Transmission Distance: 0.5 PLA Bambu Labs Basic Beige (10201) Transmission Distance: 8 PLA Bambu Labs Basic Jade White (10100) Transmission Distance: 5 This print uses 4 unique filaments
Swap Instructions: Start with Black (10101) At layer #8 (0.72mm) swap to Bronze (10801) At layer #10 (0.88mm) swap to Beige (10201) At layer #21 (1.76mm) swap to Jade White (10100) for the rest.
























